RPM Borate EP Lubricant ISO 150
RPM Borate EP Lubricant
ISO 150 Extreme Pressure Gear Oil
Multipurpose automotive extreme pressure (EP) gear lubricant which is also suitable for many industrial applications. Contains a Borate EP additive system and supplemental anti-wear agent to provide wear protection superior to conventional EP gear lubricants. Also contains oxidation, corrosion and foam inhibitors. A problem solver for severe gear lubrication applications.
Pack Sizes: 205L 20L
Caltex Product Code: 1340
Applications
-
Automotive differentials and gear cases operating under severe service conditions. Particularly for off‑highway and heavy-duty trucking fleets.
-
Heavy-duty transmissions where manufacturers recommend API GL-5 lubricants. May also be used in transmission applications where non-EP lubricants are normally recommended.
-
Industrial enclosed gears operating under severe conditions, including steel-on-bronze worm gears.
-
Drive and reduction gearboxes on mills, mixers, crushers, extruders, kilns, stenters, pumps and hoists.
Automotive differentials and gear cases operating under severe service conditions. Particularly for off‑highway and heavy-duty trucking fleets.
Heavy-duty transmissions where manufacturers recommend API GL-5 lubricants. May also be used in transmission applications where non-EP lubricants are normally recommended.
Industrial enclosed gears operating under severe conditions, including steel-on-bronze worm gears.
Drive and reduction gearboxes on mills, mixers, crushers, extruders, kilns, stenters, pumps and hoists.
Not recommended where excessive water contamination is likely to occur.
Performance Standards
-
API GL-5, GL-4 and GL-2
-
U.S. Military MIL-L-2105D (ISO 150)
-
David Brown Table E Approved: 4E to 7E (ISO 150 to 460)
API GL-5, GL-4 and GL-2
U.S. Military MIL-L-2105D (ISO 150)
David Brown Table E Approved: 4E to 7E (ISO 150 to 460)
Typical Characteristics
| SAE Grade Gear |
SAE Grade Engine |
ISO Grade | Density @ 15°C kg/L |
Pour Point °C |
Flash Point °C |
Viscosity cSt @ 40°C |
Viscosity cSt @ 100°C |
VI |
|---|---|---|---|---|---|---|---|---|
| 80W-90 | – | 150 | 0.91 | -30 | ≥ 190 | 143 | 14.6 | 101 |
Typical Characteristics
SAE Grade – Gear: 80W-90
SAE Grade – Engine: –
ISO Grade: 150
Density @ 15°C kg/L: 0.91
Pour Point °C: -30
Flash Point °C: ≥ 190
Viscosity cSt @ 40°C: 14.6
Viscosity cSt @ 100°C: 143
VI: 101
